EDA Partners

Artwork Conversion Software develops CAD translators, high speed viewers and high resolution rasterizers (vector to bitmap) for CAD data bases such as GDSII, Gerber, DXF, MEBES, OASIS, ODB++ (and more) for output to desktop or wide-format printers and plotters. Artwork also supplies tools for handling large IC layout databases: Qckvu3 GDSII, OASIS and MEBES viewer; QISLib, a GDSII and OASIS library for viewing, editing, and fracturing; GDS_RIP, a high resolution rasterizer for mask writers and inspection equipment and QckBool, a boolean polygon geometry engine.
AtaiTec Corp. is the premier signal integrity software and consulting firm, with headquarters in the Silicon Valley. We specialize in signal and power integrity modeling, simulation, and measurement correlation for IC, package, connector, cable, and board.
BERTEN is a privately held company that provides high-speed electronics products and embedded software for the most demanding applications, including aerospace, defence, avionics, navigation, unmanned vehicles, and science. BERTEN is specialised in advanced electronics, signal and power integrity, firmware development, software acceleration, and FPGA design. Standard products include rugged SBC (Single Board Computers) with the latest FPGA and SoC technology, ready for operating in harsh environmental conditions.
DeFacTo is an innovative chip design software company developing breakthrough technology to dramatically enhance the DFT process and increase the testability of integrated circuits (ICs) and systems on a chip (SoCs). The development of DeFacTo's technology was begun at the National Polytechnic Institute of Grenoble (INPG-France) in 1997. More than 18 man-years of work were applied to the unique technology for moving DFT from a post-synthesis process to pre-synthesis.
Excellicon is a privately funded EDA company established in 2009. Excellicon is focused on developing software solutions addressing timing constraints authoring, verification, and management. Excellicon patented software is designed by semiconductor professionals for semiconductor professionals with the designer point of view in mind. Excellicon products are architected and developed by our team in California. Our Bangalore design team works closely with core product architects and development team to bring superior products to the market place.
Fractal Technologies is a privately held company with offices in San Carlos, California and Eindhoven, the Netherlands. The company was founded by a small group of highly recognized EDA professionals. The scope of Fractal Technologies is to check consistency and validate all different dataformats used in your design and subsequently improve the Quality of your Standard Cell Libraries, IO and IP. Fractal Technologies offers Crossfire software as well as services and customization.
We started Insight EDA with one key concept in mind: Checking circuit reliability doesn't have to be difficult. A circuit engineer should be able to bring up a tool, with minimal setup, and get clear results. Tweak the circuit, fix an issue, and submit the updates. - All without waiting on the CAD team for help. And simple to use doesn't mean simple minded. Checks must be smart enough to know about the ins and outs of real world circuits, automatically. Like novel level shifter topologies, ad-hoc domain isolation, safe vs unsafe power states, and other unexpected situations.
IntelliSense ignited the MEMS industry in the early 1990’s with its IntelliSuiteR family of innovative CAD tools — and is now the leading innovator and supplier of design and development solutions for the MEMS professional. With users in more than 35 countries, IntelliSense offers software tools and custom design, consulting and market research services to universities, blue-chip companies and start-ups worldwide.
IO Methodology Incorporated (IOMETH) was founded by private investors in September, 2006 in Massachusetts, United States of America. It is an EDA tool development and consulting service company mainly focused on electronic behavioral modeling development and support. IOMETH provides the cutting-edge modeling tools for IC vendors as well as system vendors. It enables accurate and fast simulations for higher productivity and lower costs on complex system designs.
Jedat is a research and development oriented company that offers EDA (Electronic Design Automation) software essential for designing semiconductor devices and chips (LSIs) and liquid crystal display (LCD) panels. HOTSCOPE is an ultra-high performance data browser that allows users to open and view terabyte-sized data within a short time and provides quick hotspot check and layout analysis capabilities.
MicroScape Technology Co. Ltd. is a company which specializes in customized Electronic Design Automation (EDA) software development and professional EDA related software services. The company’s team has profound knowledge and background in EDA tool design technology and has deep understanding of the current IC design challenges and difficulties. They are especially experienced in areas of layout verification, parasitic extraction, software development on OpenAccess platform and PDK development and automation techniques.
NEC Corporation is a leader in the integration of IT and network technologies that benefit businesses and people around the world. By providing a combination of products and solutions that cross utilize the company’s experience and global resources, NEC’s advanced technologies meet the complex and ever-changing needs of its customers. Based in Japan, NEC brings more than 100 years of expertise in technological innovation to empower people, businesses and society.
OneSpin Solutions has established itself as a leader in formal verification through our range of advanced electronic design automation (EDA) solutions for digital integrated circuits. Headquartered in Munich, Germany, we are passionate about enabling our customers to address design challenges in areas where reliability really counts: safety-critical verification, SystemC/C++ high-level synthesis (HLS) code analysis, and FPGA equivalence checking. Our advanced formal verification platform and dedication to getting it right the first time have fueled dramatic growth over the past four years as we forge partnerships with leading electronics companies to pursue design perfection. OneSpin: Making Electronics Reliable
Space Codesign® Systems, Inc. offers Virtual Platform technology products and services for the creation of embedded systems applications centered on ESL (Electronic System Level) design technology and hardware/software codesign methodology. The pioneering HW/SW codesign technology produced by Space Codesign Systems enables electronics engineers to work at a higher level of abstraction and executable representation for complex embedded systems design – such as in aerospace and commercial mobile electronics applications.
Founded in 1988, Tanner EDA provides a complete line of software solutions for the design innovation, verification and layout of analog/mixed-signal (A/MS) integrated circuits (ICs), ASICs and MEMS. The company has shipped over 33,000 licenses of its software to more than 5,000 customers in 67 countries. With a low learning curve, high interoperability, and a powerful user interface, Tanner EDA offers a right solution to improve design team productivity and enable a low total cost of ownership (TCO). Customers are creating breakthrough applications in areas such as power management, displays and imaging, automotive, consumer electronics, life sciences, and RF devices.